Upínací sady BAR, povrch QPQ, otvor Ø 25 mm

Material: Steel.

- For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly.

Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm.

QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4.

služby: online CAD katalog

Dodávané 3D modely, obrázky a technické výkresy jsou vyrobeny s velikou péčí. Přesto je vyloučena odpovědnost za přesnost a správnost těchto údajů.

viz také:

součást skupin produktů:

číslo výrobku d
[mm]
D
[mm]
L
[mm]
L1
[mm]
L2
[mm]
přenášený točivý moment T
[Nm]
přenášená axiální síla Fax
[kN]
povrchový tlak na hřídeli P W
[N/mm2]
povrchový tlak na náboji PN
[N/mm2]
šrouby velikost (DIN 912, 12.9) utahovací moment TA
[Nm]
šrouby počet hmotnost
[kg]
61572500 CAD 25 47 26 25 32,0 300 24 147 78 M6 x 25 17 4 0,190