Stahovací kotouče ST

Material: High quality steel 42CrMo4.

  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For medium torques.
  • Quick mounting.
  • Quick dismounting.
  • No axial offset during mounting.

Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.

Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.
It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk.

služby: online CAD katalog

Dodávané 3D modely, obrázky a technické výkresy jsou vyrobeny s velikou péčí. Přesto je vyloučena odpovědnost za přesnost a správnost těchto údajů.

viz také:

číslo výrobku vnitřní Ø d
[mm]
hřídel Ø dw
[mm]
točivý moment T
[Nm]
D
[mm]
L
[mm]
L2
[mm]
l
[mm]
e
[mm]
šrouby
[počet x velikost]
utahovací moment TA
[Nm]
kontaktní tlak PW
[N/mm2]
hmotnost
[kg]
61581400 CAD 14 10 - 12 40- 65 38 15 18,5 10 2,5 4 x M5 x 12 3 154 - 243 0,10
61581600 CAD 16 12 - 14 65 - 95 41 17 20,5 12 2,5 5 x M5 x 16 3 108 - 190 0,14
61581800 CAD 18 14 - 16 85 - 130 44 17 20,5 12 2,5 4 x M5 x 16 4 172 - 233 0,15
61582000 CAD 20 15 - 17 110 - 150 46 17 20,5 12 2,5 5 x M5 x 16 4 205 - 258 0,17
61582100 CAD 21 16 - 18 180 - 270 50 20 23,5 14 3,0 6 x M5 x 18 5 220 - 275 0,23
61582400 CAD 24 19 - 21 220 - 330 50 20 23,5 14 3,0 6 x M5 x 18 5 189 - 228 0,22
61583000 CAD 30 24 - 26 350 - 470 60 22 25,5 16 3,0 7 x M5 x 18 5 159 - 184 0,33
61583600 CAD 36 28 - 31 730 - 880 72 23,5 27,5 18 2,75 5 x M6 x 20 12 232 - 250 0,52
61583800 CAD 38 29 - 31 710 - 760 72 23,5 27,5 18 2,75 6 x M6 x 20 12 198 - 211 0,50
61584000 CAD 40 30 - 32 770 - 825 72 23,5 27,5 18 2,75 6 x M6 x 20 12 216 - 230 0,50
61584400 CAD 44 32 - 36 1200 - 1500 80 25,5 29,5 20 2,75 7 x M6 x 20 12 225 - 244 0,64
61585000 CAD 50 38 - 42 1500 - 2100 90 27,5 31,5 22 2,75 8 x M6 x 25 12 204 - 232 0,87
61585500 CAD 55 42 - 48 1700 - 2600 100 30,5 34,5 23 3,75 8 x M6 x 25 12 176 - 210 1,18
61586200 CAD 62 48 - 52 2700 - 3200 110 30,5 34,5 23 3,75 10 x M6 x 25 12 213 - 222 1,41
61586800 CAD 68 50 - 60 2500 - 4100 115 30,5 34,5 23 3,75 10 x M6 x 25 12 184 - 212 1,46
61587500 CAD 75 55 - 65 3500 - 6000 138 32,5 37,8 25 3,75 7 x M8 x 30 30 199 - 241 2,45