Gumovo-kovový doraz KE, pozinkované

Material: Metal parts: Steel, zinc-plated. Elastomer: Natural rubber Hardness 55° Shore.

Rubber-Metal buffers are simple, reasonably priced standard components used for elastic mounting. When shearing load occurs their load-bearing capacity is considerably lower than with pressure load. This has to be considered when horizontal mass forces or belt traction occur. The grade of rubber used has perfect physical properties. * Fperm. is the permissible static permanent load, which may be overlaid by a dynamic, alternating load. With shearing load please take care that no tension load in the rubber occurs at all during mounting. To achieve a sufficient fatigue strength provide some compressive pre-stressing. The stated permissible loads are only approximate, guideline values for the static load for "medium" rubber hardness. With particularly high, dynamic, alternating loads or high frequencies, the load figures have to be reduced accordingly. Temperature resistant up to 80°C.

služby: online CAD katalog

Dodávané 3D modely, obrázky a technické výkresy jsou vyrobeny s velikou péčí. Přesto je vyloučena odpovědnost za přesnost a správnost těchto údajů.

viz také:

číslo výrobku D
[mm]
H
[mm]
G
[mm]
I
[mm]
tuhost CD
[N/mm]
dovolené zatížení v tlaku Fdovolené*
[N]
hmotnost
[g]
68513100 CAD 50 35 M10 10 100 400 88
68513500 CAD 80 60 M12 12 170 1200 308
68514100 CAD 125 90 M16 16 260 3000 830