Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7
služby: online CAD katalog
Dodávané 3D modely, obrázky a technické výkresy jsou vyrobeny s velikou péčí. Přesto je vyloučena odpovědnost za přesnost a správnost těchto údajů.
viz také:
součást skupin produktů:
| číslo výrobku | d1 [mm] |
dolní tolerance d1 [mm] |
horní tolerance d1 [mm] |
d2 [mm] |
rozměr d2 [mm] |
d3 [mm] |
b1 [mm] |
b2 [mm] |
hmotnost [g] |
|
|---|---|---|---|---|---|---|---|---|---|---|
| 62381900 | CAD | 14 | +0,11 | +0,17 | 20 | +0,12 | 30 | 24 | 2 | 2,8 |
