Upínací pouzdra MSM-N, B 25mm

Material: Stainless steel 1.4568 (17/7 PH).

The MSD-N clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted.

Concentricity: 0,03 - 0,06 mm.

Tolerance: Shaft h9 (Ø 15 mm only h8), Hub H7.

Advantages:

  • fast mounting/demounting
  • sensitive adjustment of the hub can be carried out during assembly

    - low fastening torque and few screws allow very simple assembly.

  • good concentricity
  • small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0.

If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. Temperature range: -30° to +85°C. The dimensions refer to bushes before assembly.

služby: online CAD katalog

Dodávané 3D modely, obrázky a technické výkresy jsou vyrobeny s velikou péčí. Přesto je vyloučena odpovědnost za přesnost a správnost těchto údajů.

součást skupin produktů:

číslo výrobku d
[mm]
D
[mm]
D1
[mm]
L
[mm]
L1
[mm]
L2
[mm]
přenášený točivý moment T
[Nm]
přenášená axiální síla Fax
[kN]
PW
[N/mm2]
PN
[N/mm2]
šrouby počet šrouby velikost
[DIN 933, A4]
utahovací moment TA
[Nm]
hmotnost
[kg]
61599325 CAD 25 34 49 43 27 46 210 16,8 90 70 7 M 5 5,4 0,19