Šnekový zvedák NP/I, verze C s posuvnou maticí, velikost 2, závit Tr. 20 x 4

Version C: The spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit.

Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit (also 1 mm stroke per full rotation of the worm shaft).

služby: online CAD katalog další informace návod k obsluze

Dodávané 3D modely, obrázky a technické výkresy jsou vyrobeny s velikou péčí. Přesto je vyloučena odpovědnost za přesnost a správnost těchto údajů.

součást skupin produktů:

číslo výrobku velkost max. zdvihová síla
[N]
D4 vřetena efektivnost
[%]
posuv*
[mm]
MD**
[Nm]
A1
[mm]
B2
[mm]
C2
[mm]
hmotnost (jen převodovka)
[kg]
47502200 CAD 2 10000 Tr.20x4 30 1 7 100 85 75 2,1