ProduktyVýrobky z gumyGumovo-kovové tlumiče AT, pozinkované

Gumovo-kovové tlumiče AT, pozinkované

Material: Metal parts: Steel, zinc-plated. Elastomer: Natural rubber hardness 55° Shore. Rubber-Metal buffers are simple, reasonably priced standard components used for elastic mounting. When shearing load occurs their load-bearing capacity is considerably lower than with pressure load. This has to be considered when horizontal mass forces or belt traction occur. The grade of rubber used has perfect physical properties. * Fperm. is the permissible static permanent load, which may be overlaid by a dynamic, alternating load. With shearing load please take care that no tension load in the rubber occurs at all during mounting. To achieve a sufficient fatigue strength provide some compressive pre-stressing. The stated permissible loads are only approximate, guideline values for the static load for "medium" rubber hardness. With particularly high, dynamic, alternating loads or high frequencies, the load figures have to be reduced accordingly. Temperature resistant up to 80°C.

služby: online CAD katalog

Dodávané 3D modely, obrázky a technické výkresy jsou vyrobeny s velikou péčí. Přesto je vyloučena odpovědnost za přesnost a správnost těchto údajů.

viz také:

číslo výrobku D
[mm]
H
[mm]
G
[mm]
I
[mm]
tuhost CD
[N/mm]
dovolené zatížení v tlaku Fdovolené*
[N]
hmotnost
[g]
68563100 CAD 20 15 M 6 18 100 300 15
68563500 CAD 30 20 M 8 20 150 700 46
68564100 CAD 40 48 M 8 23 160 900 88
68564500 CAD 50 30 M10 33 210 1100 140
68565100 CAD 75 40 M12 37 600 3000 369
68565500 CAD 100 55 M16 42 850 4100 975