ProduktyVýrobky z gumyGumovo-kovové tlumiče CT, pozinkované

Gumovo-kovové tlumiče CT, pozinkované

Material: Metal parts: Steel, zinc-plated. Elastomer: Natural rubber hardness 55° Shore.

Rubber-Metal buffers are simple, reasonably priced standard components used for elastic mounting. When shearing load occurs their load-bearing capacity is considerably lower than with pressure load. This has to be considered when horizontal mass forces or belt traction occur. The grade of rubber used has perfect physical properties. * Fperm. is the permissible static permanent load, which may be overlaid by a dynamic, alternating load. With shearing load please take care that no tension load in the rubber occurs at all during mounting. To achieve a sufficient fatigue strength provide some compressive pre-stressing. The stated permissible loads are only approximate, guideline values for the static load for "medium" rubber hardness. With particularly high, dynamic, alternating loads or high frequencies, the load figures have to be reduced accordingly. Temperature resistant up to 80°C.

služby: online CAD katalog

Dodávané 3D modely, obrázky a technické výkresy jsou vyrobeny s velikou péčí. Přesto je vyloučena odpovědnost za přesnost a správnost těchto údajů.

viz také:

číslo výrobku D
[mm]
H
[mm]
G
[mm]
I
[mm]
tuhost v tlaku CD průměrně
[N/mm]
dovolené zatížení v tlaku Fdovolené*
[N]
tuhost střihu CS průměrně
[N/mm]
dovolené zatížení v střihu Fdovolené*
[N]
hmotnost
[g]
68572100 CAD 10 10 M4 4 30 35 4 20 2
68572200 CAD 20 15 M6 6 65 275 10 35 8
68572300 CAD 30 20 M8 8 130 650 25 85 32
68572500 CAD 40 48 M8 8 145 870 80 130 109
68572700 CAD 50 30 M10 10 200 1000 63 240 72