Precision single universal joint DIN 808 AR bore 6H7 outer diameter 16,5mm

Material: Steel 11SMnPb30. Max. Operating Angle 45°.

### Discontinued item. Please take universal joints type WE. ###

In their connecting dimensions, these universal joints comply with DIN 808. Their load capacity surpasses the performance required according to the DIN standard. The constructive features indicate that with extreme loads, e.g., shock or vibration loads, these joints should not be used. When pin holes are bored, do not bore through brackets. Pin holes can therefore only be positioned between brackets. Feather-key grooves can also only be machined between brackets, i.e. the keyways have to be cut offset by 90° to the brackets. The joints must not be shortened. The outer part of the joints is a thin-walled sleeve, which is pressed onto the carrier and the brackets. This sleeve gives the brackets additional support.

services: further information

The supplied 3D models, pictures and technical drawings are made with reasonable care. Nevertheless liability is excluded for the accuracy and correctness of this data.

found in parts groups:

part number d1 H7
[mm]
d2
[mm]
l1
[mm]
l2
[mm]
Gewicht
[kg]
zul.max.Drehmom. bei :100 min -1
[Nm]
bei 200 min -1
[Nm]
bei 300 min -1
[Nm]
bei 400 min -1
[Nm]
bei 500 min -1
[Nm]
bei 700 min -1
[Nm]
bei 800 min -1
[Nm]
63101600 CAD 6 16 9 34 0,06 7 7,5 6 5,5 5 - -