Bolt-on Hubs for Taper Bushes

Material: Grey cast iron GG25.

Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.

In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes)

services: assembly instruction online CAD catalog

The supplied 3D models, pictures and technical drawings are made with reasonable care. Nevertheless liability is excluded for the accuracy and correctness of this data.

part number für Spannbuchse Øda
[mm]
L
[mm]
ØD-0,05
[mm]
ØC
[mm]
B1
[mm]
B2
[mm]
B3
[mm]
ØDB
[mm]

[mm]
ØB
[mm]
Pos. Gewicht
[kg]
14090120 CAD 1210 120 25 80 70 9,0 7,5 2,5 100 6 7,5 60° 0,90
14090121 CAD 1210 180 25 90 75 9,25 6,5 2,5 135 6 7,5 60° 1,55
14090125 CAD 1610 130 25 90 80 9,0 7,5 2,5 110 6 7,5 60° 1,00
14090130 CAD 1615 200 38 110 85 15,3 7,5 2,5 150 6 7,5 60° 2,45
14090135 CAD 2012 145 32 115 95 12,0 9,5 2,5 125 6 9,5 60° 1,50
14090136 CAD 2012 270 32 140 110 11,8 8,5 2,5 190 6 9,5 60° 4,4
14090140 CAD 2517 185 45 130 115 19,0 12,5 2,5 155 6 11,5 60° 3,1
14090141 CAD 2517 340 45 170 125 17,8 9,5 2,5 240 8 11,5 45° 7,9
14090145 CAD 3020 220 51 165 145 19,0 12,5 2,5 190 6 13,5 60° 5,0
14090146 CAD 3020 430 51 220 160 18,8 13,5 2,5 300 8 13,5 45° 16,5
14090147 CAD 3020 485 51 250 160 18,8 13,5 2,5 340 8 13,5 45° 19,3