Bevel gear made of steel module 3 15 teeth i=2:1 milled

Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
Up to module 5 with crowned, milled teeth.
From module 6 with planed teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.

Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.

services: online CAD catalog further information

The supplied 3D models, pictures and technical drawings are made with reasonable care. Nevertheless liability is excluded for the accuracy and correctness of this data.

see also:

found in parts groups:

part number Übersetzung
[i]
Modul Zähnezahl da
[mm]
d
[mm]
ND
[mm]
NL
[mm]
L1
[mm]
L
[mm]
S
[mm]
b
[mm]
BH7
[mm]
E
[mm]
zul. MD
[Nm]
Gewicht
[g]
passendes Gegenrad
[Artikel-Nr.]
36145600 CAD 2:1 (15/30) 3,0 15 50,6 45 30 11,5 33 35,4 16,4 22 10 60 6,1 270 36145700