Material: Zinc die-cast ZnAI4Cu1.
Shaft angle = 90°. Bores machined. The bevel gears only run as a pair at the stated ratio. In the torque calculation of zinc-die-cast bevel gears only the root strength was considered. Due to the material properties these gears are only to a limited extend suitable for continuous operation. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
services: online CAD catalog further information
The supplied 3D models, pictures and technical drawings are made with reasonable care. Nevertheless liability is excluded for the accuracy and correctness of this data.
see also:
| part number | Übersetzung | Modul | Zähnezahl | da [mm] |
d [mm] |
ND [mm] |
NL [mm] |
L1 [mm] |
L [mm] |
b [mm] |
BH9 [mm] |
E [mm] |
zul. MD [Ncm] |
Gewicht [g] |
passendes Gegenrad [Artikel-Nr.] |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 35850700 | CAD | 1:1 (16/16) | 1,0 | 16 | 17,5 | 16 | 12 | 7,5 | 13,0 | 13,0 | 4,5 | 6 | 17,9 | 14 | 7 | 35850700 |
| 35870700 | CAD | 1:1 (16/16) | 1,5 | 16 | 26 | 24 | 19 | 10,7 | 17,0 | 18,6 | 6,9 | 8 | 25,5 | 46 | 27 | 35870700 |
| 35900700 | CAD | 1:1 (16/16) | 2,0 | 16 | 34,6 | 32 | 23 | 10 | 19,2 | 21,3 | 9,6 | 10 | 30,0 | 110 | 52 | 35900700 |
| 35910700 | CAD | 1:1 (16/16) | 2,5 | 16 | 43,3 | 40 | 26 | 12 | 23,0 | 25,5 | 12,3 | 12 | 36,2 | 230 | 88 | 35910700 |
| 35940700 | CAD | 1:1 (16/16) | 3,0 | 16 | 52,3 | 48 | 30 | 13 | 26,0 | 29,3 | 14 | 14 | 42,5 | 380 | 146 | 35940700 |
| 35950700 | CAD | 1:1 (16/16) | 3,5 | 16 | 61,4 | 56 | 34 | 14 | 29,2 | 33,2 | 15,5 | 16 | 49,4 | 580 | 228 | 35950700 |
