Rubber-metal MGS diameter 15mm height 10mm thread M4x10

Material: Metal parts: Steel, zinc-plated. Elastomer: Natural rubber, hardness 55° Shore.

Metal on one side only. Metal bumpers can be used to limit bearing surfaces e.g. for elastically mounted power units, and as bump stop to limit the spring travel in vehicles. They can also be used for machines that cannot be fixed to the floor or are standing on floors with an easily damaged surface, e.g. office machines. * Fperm. is the permissible static permanent load, which may be overlaid by a dynamic, alternating load. With shearing load please take care that no tension load in the rubber occurs at all during mounting. To achieve a sufficient fatigue strength provide some compressive pre-stressing. The stated permissible loads are only approximate, guideline values for the static load for "medium" rubber hardness. With particularly high, dynamic, alternating loads or high frequencies, the load figures have to be reduced accordingly. Temperature resistant up to 80°C.

services: online CAD catalog

The supplied 3D models, pictures and technical drawings are made with reasonable care. Nevertheless liability is excluded for the accuracy and correctness of this data.

see also:

found in parts groups:

part number D
[mm]
H
[mm]
G
[mm]
I
[mm]
Druck Federrate CD mittel
[N/mm]
Zul. Belastung Fzul.*
[N]
Gewicht
[g]
68578800 CAD 15 10 M4 10 106 95 3,8