ProductsSplined Shafts and Toothed Shafts and HubsClamp Collars for Spline Shafts - DIN ISO 14, Aluminium

Clamp Collars for Spline Shafts - DIN ISO 14, Aluminium

Material: Aluminium. Screw stainless steel A2-70.

Single-split clamp collars, as end-stops on spline shafts.

These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust.

Version 1: The thread of the screw DIN 912 is covered with a layer of nylon.

Version 2: with additional nut, for adjusting the inner diameter and as lock nut.

Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C.

services: online CAD catalog

The supplied 3D models, pictures and technical drawings are made with reasonable care. Nevertheless liability is excluded for the accuracy and correctness of this data.

part number Profil
[mm]
Ausführung A
[mm]
d
[mm]
L
[mm]
Rmax.
[mm]
Schraube
[DIN 912]
Mutter sw
[mm]
Gewicht
[g]
64862100 CAD KN 18 x 22 1 42 18 15 49,3 M6 x 16 - 43
64862200 CAD KN 11 x 14 1 30 11 11 34,7 M4 x 12 - 17
64862300 CAD KN 23 x 28 1 48 23 15 54,4 M6 x 18 - 51
64862400 CAD KN 13 x 16 1 34 13 13 39,9 M5 x 14 - 25
64862500 CAD KN 16 x 20 1 40 16 15 47,6 M6 x 16 - 42
64862600 CAD KN 21 x 25 1 45 21 15 51,8 M6 x 16 - 46
64862700 CAD KN 26 x 32 1 54 26 15 59,7 M6 x 18 - 66
64862800 CAD KN 32 x 38 2 60 32 15 66,0 M6 x 18 10 76
64862900 CAD KN 28 x 34 2 57 28 15 62,3 M6 x 18 10 72
64863000 CAD KN 42 x 48 2 78 42 19 85,7 M8 x 25 13 166
64863200 CAD KN 36 x 42 2 73 36 19 80,4 M8 x 25 13 155