ProductsAll New Products 2021 - 2022Clamp Collars for Spline Shafts - DIN ISO 14, Steel

Clamp Collars for Spline Shafts - DIN ISO 14, Steel

Material: Steel C45, screw strength 12.9, zinc-plated.

Single-split clamp collars, as end-stops on spline shafts.
These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust.

Version 1: The thread of the screw DIN 912 is covered with a layer of nylon.
Version 2: with additional nut, for adjusting the inner diameter and as lock nut.
Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C.

services: online CAD catalog

The supplied 3D models, pictures and technical drawings are made with reasonable care. Nevertheless liability is excluded for the accuracy and correctness of this data.

part number Profil
[mm]
Ausführung A
[mm]
d
[mm]
L
[mm]
Rmax.
[mm]
Schraube
[DIN 912]
Mutter sw
[mm]
Gewicht
[g]
64867100 CAD KN 18 x 22 1 42 18 15 49,3 M6 x 16 - 118
64867200 CAD KN 11 x 14 1 30 11 11 34,7 M4 x 12 - 46
64867300 CAD KN 23 x 28 1 48 23 15 54,4 M6 x 18 - 144
64867400 CAD KN 13 x 16 1 34 13 13 39,9 M5 x 14 - 70
64867500 CAD KN 16 x 20 1 40 16 15 47,6 M6 x 16 - 110
64867600 CAD KN 21 x 25 1 45 21 15 51,8 M6 x 16 - 124
64867700 CAD KN 26 x 32 2 54 26 15 59,7 M6 x 18 10 180
64867800 CAD KN 32 x 38 2 60 32 15 66,0 M6 x 18 10 204
64867900 CAD KN 28 x 34 2 57 28 15 62,3 M6 x 18 10 196
64868000 CAD KN 42 x 48 2 78 42 19 85,7 M8 x 25 13 450
64868200 CAD KN 36 x 42 2 73 36 19 80,4 M8 x 25 13 416