Material: Specially treated bright steel C45KG. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch.
služby: online CAD katalog další informace
Dodávané 3D modely, obrázky a technické výkresy jsou vyrobeny s velikou péčí. Přesto je vyloučena odpovědnost za přesnost a správnost těchto údajů.
| číslo výrobku | modul | b [mm] |
ha [mm] |
jmenovitá délka L [mm] |
konečná velikost [mm] |
h0 [mm] |
materiál | hmotnost [kg] |
komentář | |
|---|---|---|---|---|---|---|---|---|---|---|
| 24188605 | CAD | 2,0 | 20 | 20 | 1000 | 1005,0-1,0 | 18,0 | C45KG | 2,77 | |
| 24188609 | CAD | 2,0 | 20 | 20 | 2000 | 2004,0-1,5 | 18,0 | C45KG | 5,50 | |
| 24288605 | CAD | 2,5 | 25 | 25 | 1000 | 1005,0-1 | 22,5 | C45KG | 4,31 | |
| 24288609 | CAD | 2,5 | 25 | 25 | 2000 | 2002,5-1,5 | 22,5 | C45KG | 8,61 | |
| 24388605 | CAD | 3,0 | 30 | 30 | 1000 | 1008,0-1,5 | 27,0 | C45KG | 6,27 | |
| 24388609 | CAD | 3,0 | 30 | 30 | 2000 | 2007,0-1,5 | 27,0 | C45KG | 12,43 | |
| 24488605 | CAD | 4,0 | 40 | 40 | 1000 | 1005,0-1,5 | 36,0 | C45KG | 11,14 | |
| 24488609 | CAD | 4,0 | 40 | 40 | 2000 | 2010,0-1,5 | 36,0 | C45KG | 22,5 | |
| 24588605 | CAD | 5,0 | 50 | 50 | 1000 | 1005,0-1,5 | 45,0 | C45KG | 17,5 | |
| 24588609 | CAD | 5,0 | 50 | 50 | 2000 | 2010,0-1,5 | 45,0 | C45KG | 35 | |
| 24688605 | CAD | 6,0 | 60 | 60 | 1000 | 998,5-1,5 | 54,0 | C45KG | 25 | |
| 24688609 | CAD | 6,0 | 60 | 60 | 2000 | 1997,5-1,5 | 54,0 | C45KG | 50 |
