Material: Steel.
- For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly.
Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm.
QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4.
služby: online CAD katalog
Dodávané 3D modely, obrázky a technické výkresy jsou vyrobeny s velikou péčí. Přesto je vyloučena odpovědnost za přesnost a správnost těchto údajů.
viz také:
součást skupin produktů:
| číslo výrobku | d [mm] |
D [mm] |
L [mm] |
L1 [mm] |
L2 [mm] |
přenášený točivý moment T [Nm] |
přenášená axiální síla Fax [kN] |
povrchový tlak na hřídeli P W [N/mm2] |
povrchový tlak na náboji PN [N/mm2] |
šrouby velikost (DIN 912, 12.9) | utahovací moment TA [Nm] |
šrouby počet | hmotnost [kg] |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 61571000 | CAD | 10 | 20 | 13 | 12,5 | 15,5 | 19 | 4 | 120 | 60 | M2,5 x 12 | 1,2 | 4 | 0,019 |
