Material: Metal parts: Steel, zinc-plated. Elastomer: Natural rubber, hardness 55° Shore.

Metal on one side only. Metal bumpers can be used to limit bearing surfaces e.g. for elastically mounted power units, and as bump stop to limit the spring travel in vehicles. They can also be used for machines that cannot be fixed to the floor or are standing on floors with an easily damaged surface, e.g. office machines. * F_perm. is the permissible static permanent load, which may be overlaid by a dynamic, alternating load. With shearing load please take care that no tension load in the rubber occurs at all during mounting. To achieve a sufficient fatigue strength provide some compressive pre-stressing. The stated permissible loads are only approximate, guideline values for the static load for "medium" rubber hardness. With particularly high, dynamic, alternating loads or high frequencies, the load figures have to be reduced accordingly. Temperature resistant up to 80°C.

služby: online CAD katalog

Dodávané 3D modely, obrázky a technické výkresy jsou vyrobeny s velikou péčí. Přesto je vyloučena odpovědnost za přesnost a správnost těchto údajů.

viz také:

Pouzdra ze spékaného bronzu, podobné DIN 1850 J (DIN 4379 tvar C)

WD-40® Multi-Use Product Smart Straw®

Jednodílná svěrná spojka MAS, ocel, bez drážky pro pero

Torzně tuhé spojky HFD s průchozím otvorem, s upínacími náboji