AMECOMAEDLER
catalog
downloads
login or register
AMECOMAEDLER
AMECOMAEDLER
Products ▶ DIN-Parts sorted by DIN-Number ▶ DIN 12240 - Rod Ends and Spherical Bearings ▶ Rod ends GS DIN ISO 12240-4, K, re-lubricateable ▶ Rod ends GS DIN ISO 12240-4, K, re-lubricateable, internal thread

Rod end GS DIN ISO 12240-4 series K internal thread M14 left == Initial lubrication required before use ==

Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.

  • Heavy-duty rod ends for high radial and axial alternating loads.
  • Steel on high-duty brass.
  • Can be re-lubricated (only from size 5mm).
  • Sliding speed up to 60 m/min.

Initial lubrication required before use

services: online CAD catalog further information

The supplied 3D models, pictures and technical drawings are made with reasonable care. Nevertheless liability is excluded for the accuracy and correctness of this data.

see also:

Clevis Joints similar to DIN 71752, Stainless Steel
Clevis Joints similar to DIN 71752, Stainless Steel

found in parts groups:

Products ▶ Rod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints ▶ Rod Ends DIN ISO 12240 (ex DIN 648) ▶ Rod ends GS DIN ISO 12240-4, K, re-lubricateable ▶ Rod ends GS DIN ISO 12240-4, K, re-lubricateable, internal thread
Products ▶ DIN-Parts sorted by DIN-Number ▶ DIN 648 - Rod Ends and Spherical Bearings ▶ Rod ends GS DIN 648 (12240), K, re-lubricateable ▶ Rod ends GS DIN ISO 12240-4, K, re-lubricateable, internal thread
Products ▶ DIN-Parts sorted by DIN-Number ▶ DIN 12240 - Rod Ends and Spherical Bearings ▶ Rod ends GS DIN ISO 12240-4, K, re-lubricateable ▶ Rod ends GS DIN ISO 12240-4, K, re-lubricateable, internal thread
part number Thread dH7
[mm]		 B-0,1
[mm]		 C1
[mm]		 d1
[mm]		 d2
[mm]		 d3
[mm]		 d4
[mm]		 h1
[mm]		 l3 +0/-1,0
[mm]		 Thread M (ISO DIN 13 6 H)
[mm]		 Thread Slope
[mm]		 W
[mm]		 Tilt angle Alpha
[Degrees]		 Gewicht
[g]
63211400 CAD links 14 19 13,5 16,8 36 20 25 57 25 M14 2,0 22 16 170