Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.
Tooth quality 8 modelled on DIN 3967 (from module 2).
With crowned, milled teeth. Not hardened – not lapped.
Shaft angle = 90º.
The bevel gears only run as a pair at the stated ratio and at the same module.
Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
services: online CAD catalog further information
The supplied 3D models, pictures and technical drawings are made with reasonable care. Nevertheless liability is excluded for the accuracy and correctness of this data.
| part number | Übersetzung [i] |
Modul | Zähnezahl | da [mm] |
d [mm] |
ND [mm] |
NL [mm] |
L1 [mm] |
L [mm] |
S [mm] |
b [mm] |
BH7 [mm] |
E [mm] |
zul. MD [Nm] |
Gewicht [g] |
passendes Gegenrad [Artikel-Nr.] |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 36144400 | CAD | 1,25:1 (16/20) | 3 | 16 | 52,9 | 48 | 40 | 11,7 | 27 | 29,2 | 16,9 | 17 | 15 | 45 | 5,2 | 220 | 36144500 |
| 36144500 | CAD | 1,25:1 (16/20) | 3 | 20 | 63,9 | 60 | 40 | 10,0 | 25 | 27,8 | 18,4 | 17 | 15 | 40 | 6,5 | 300 | 36144400 |
| 36184400 | CAD | 1,25:1 (16/20) | 4 | 16 | 70,6 | 64 | 50 | 12,5 | 32 | 36,5 | 20,6 | 22 | 20 | 58 | 12,7 | 470 | 36184500 |
| 36184500 | CAD | 1,25:1 (16/20) | 4 | 20 | 85,2 | 80 | 50 | 15,0 | 33 | 38,4 | 26,3 | 22 | 20 | 55 | 15,9 | 700 | 36184400 |
| 36214400 | CAD | 1,25:1 (16/20) | 5 | 16 | 88,2 | 80 | 60 | 12,0 | 40 | 44,2 | 23,3 | 29 | 20 | 70 | 25,4 | 910 | 36214500 |
| 36214500 | CAD | 1,25:1 (16/20) | 5 | 20 | 106,6 | 100 | 60 | 15,0 | 39 | 45,0 | 29,1 | 29 | 25 | 65 | 31,8 | 1300 | 36214400 |
