Material: Steel.
- For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly.
Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm.
QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4.
services: online CAD catalog
The supplied 3D models, pictures and technical drawings are made with reasonable care. Nevertheless liability is excluded for the accuracy and correctness of this data.
see also:
found in parts groups:
| part number | d [mm] |
D [mm] |
L [mm] |
L1 [mm] |
L2 [mm] |
Übertragbares Drehmoment T [Nm] |
Übertragbare Axialkraft Fax [kN] |
Surface Pressure Shaft PW [N/mm²] |
Surface Pressure Hub PN [N/mm²] |
Clamping Bolts Size | Torque Ms [Nm] |
Schraubenanzahl [Stück] |
Gewicht [kg] |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 61570500 | CAD | 5 | 16 | 11 | 10,5 | 13,5 | 6 | 2 | 150 | 55 | M2,5 x 10 | 1,2 | 3 | 0,012 |
