AMECOMAEDLER
catalog
downloads
login or register
AMECOMAEDLER
AMECOMAEDLER
Products ▶ Locking Assemblies, Clamping Bushes, Taper Bushes ▶ Locking Assemblies TT, boreholes 17 - 35 mm

Locking Assemblies TT, boreholes 17 - 35 mm

Material: Steel.

  • For fixing a hub (e.g. drive wheel,
  • rotor or similar) on a shaft.
  • For high torques.
  • Self-centering.
  • Axial offset during mounting (can be compensated by correct positioning).
Tolerances, Surfaces Ø-tolerance for shafts and hubs: +/- 0.08mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA.

services: online CAD catalog

The supplied 3D models, pictures and technical drawings are made with reasonable care. Nevertheless liability is excluded for the accuracy and correctness of this data.

see also:

Locking Assemblies BAR, boreholes 5 - 100 mm
Locking Assemblies BAR, boreholes 5 - 100 mm
Locking Assemblies SIG, Stainless, boreholes 3 - 40 mm
Locking Assemblies SIG, Stainless, boreholes 3 - 40 mm
part number d
[mm]		 D
[mm]		 L
[mm]		 L1
[mm]		 B
[mm]		 Übertragbares Drehmoment T
[Nm]		 Übertragbare Axialkraft Fax
[kN]		 Surface Pressure Hub
[N/mm²]		 Wrench Width SW
[mm]		 Torque Ms
[Nm]		 Gewicht
[g]
61550117 CAD 17 32 30 22 6 208 25 92 30 110 119
61550118 CAD 18 32 30 22 6 221 25 92 30 110 114
61550119 CAD 19 32 30 22 6 233 25 92 30 110 109
61550120 CAD 20 35 33 24 7 298 30 94 32 150 144
61550122 CAD 22 35 33 24 7 328 30 94 32 150 132
61550124 CAD 24 38 35 25 8 398 33 93 36 185 166
61550125 CAD 25 38 35 25 8 415 33 93 36 185 159
61550128 CAD 28 45 41 29 11 505 36 73 46 240 293
61550130 CAD 30 45 41 29 11 541 36 73 46 240 272
61550132 CAD 32 50 44 30 12 590 37 65 50 265 377
61550135 CAD 35 50 44 30 12 645 37 65 50 265 340