Material: Stainless steel 1.4401 (AISI 316).
Clamping bush for lower torques; not self-centering.
Fit: Shaft h8, Hub H8. Surface roughness Rz max. 16 µm.
Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring.
Ts - Fastening Torque
T - Transmittable Torque
F - Transmittable Axial Force
P - Surface Pressure onto Hub
services: online CAD catalog
The supplied 3D models, pictures and technical drawings are made with reasonable care. Nevertheless liability is excluded for the accuracy and correctness of this data.
found in parts groups:
| part number | d [mm] |
D [mm] |
L [mm] |
L2 [mm] |
Übertragbares Drehmoment T [Nm] |
Axial Force Fax [kN] |
Surface Pressure Shaft PW [N/mm²] |
Surface Pressure Hub PN [N/mm²] |
Clamping Bolts DIN 912 [N. x Typ] |
Torque Ms [Nm] |
Gewicht [kg] |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 61599522 | CAD | 22 | 47 | 20 | 26 | 180 | 16 | 107 | 48 | 8 x M6 | 8 | 0,2 |
