ProductsClamp Collars, Shaft Collars (Adjusting Rings)Rubber Pads for Shaft Collars B1

Rubber Pads for Shaft Collars B1

Material: Rubber NBR, black, 70º +/-5º Shore A.

These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft. For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used.

services: online CAD catalog

The supplied 3D models, pictures and technical drawings are made with reasonable care. Nevertheless liability is excluded for the accuracy and correctness of this data.

part number Nenngröße b2
[mm]
d1
[mm]
d2
[mm]
m
[mm]
s
[mm]
ZD
[mm]
ZL
[mm]
Gewicht
[g]
62311099 CAD 10 2 11 27 19 3 3,7 8,7 1,5
62311299 CAD 12 2 13 29 21 3 4,7 10,7 1,8
62311499 CAD 14 2 15 31 23 3 4,7 10,7 2,0
62311599 CAD 15 2 16 35 25,5 3 5,8 12,6 2,8
62311699 CAD 16 2 17 37 27 3 5,8 12,6 3,0
62311899 CAD 18 2 19 39 29 3 5,8 12,6 3,2
62312099 CAD 20 2 21 41 31 3 5,8 14,6 3,4
62312299 CAD 22 2,5 23 45 34 3 6,8 14,6 5,1
62312599 CAD 25 2,5 26 47 36,5 4 6,8 14,6 5,1
62312899 CAD 28 2,5 29 53 41 4 6,8 14,6 6,2
62313099 CAD 30 2,5 31 55 43 4 6,8 14,6 5,9
62313299 CAD 32 2,5 33 57 45 4 6,8 14,6 6,7
62313599 CAD 35 2,5 36 59 47,5 4 6,8 14,6 6,8
62314099 CAD 40 2,5 41 65 53 4 6,8 14,6 7,7
62314599 CAD 45 3,0 46 75 60,5 4 8,9 18,4 8,5
62315099 CAD 50 3,5 51 81 66 4 8,9 18,4 16,8