Material: Metal parts: Steel, zinc-plated. Elastomer: Natural rubber hardness 55° Shore.

* F_perm. is the permissible static permanent load, which may be overlaid by a dynamic, alternating load. With shearing load please take care that no tension load in the rubber occurs at all during mounting. To achieve a sufficient fatigue strength provide some compressive pre-stressing. The stated permissible loads are only approximate, guideline values for the static load for "medium" rubber hardness. With particularly high, dynamic, alternating loads or high frequencies, the load figures have to be reduced accordingly. Temperature resistant up to 80°C.

services: online CAD catalog

The supplied 3D models, pictures and technical drawings are made with reasonable care. Nevertheless liability is excluded for the accuracy and correctness of this data.

see also:

Rubber-Metal Buffers MGP with Threaded Studs, Zinc-plated

Loctite® 243 - Medium Strength Thread Locking

Pulleys HTD 5M, Belt Width 9 mm

Adjusting Rings DIN 705 A, with Slotted Set Screw, Stainless Steel