Material: Body of the nut steel, min. strength 350 N/mm2.
Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.
1) Fastening Torque of Locking Screw
services: online CAD catalog
The supplied 3D models, pictures and technical drawings are made with reasonable care. Nevertheless liability is excluded for the accuracy and correctness of this data.
found in parts groups:
| part number | Typ | d1 [mm] |
d2 [mm] |
d3 [mm] |
d4 [mm] |
d5 [mm] |
B [mm] |
b [mm] |
t [mm] |
S [mm] |
TAS1) [Nm] |
sw [mm] |
zul. Axialkraft [kN] |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 65358011 | CAD | KMT 11 | M55 x 2 | 85 | 78 | 58 | 74 | 25 | 7 | 3 | M8 | 18 | 80 | 340 |
