Material: Stainless steel 1.4401 (AISI 316).
Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting.
Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps.
Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released.
services: online CAD catalog
The supplied 3D models, pictures and technical drawings are made with reasonable care. Nevertheless liability is excluded for the accuracy and correctness of this data.
found in parts groups:
| part number | d [mm] |
D [mm] |
L [mm] |
A [mm] |
L1 [mm] |
L2 [mm] |
D1 [mm] |
Übertragbares Drehmoment T [Nm] |
Übertragbare Axialkraft Fax [kN] |
Surface Pressure Shaft PW [N/mm²] |
Surface Pressure Hub PN [N/mm²] |
Clamping Bolts DIN 912 [N. x Typ] |
Torque Ms [Nm] |
Gewicht [kg] |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 61599640 | CAD | 40 | 53 | 52 | 45 | 32 | 58 | 75 | 390 | 19 | 40 | 30 | 8 x M6 | 8 | 0,63 |
