AMECOMAEDLER
catalog
downloads
             
empty cart
Kč
AMECOMAEDLER
Kč
AMECOMAEDLER
Kč
Products ▶ Rod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints ▶ Spherical bearings DIN 12240-1, K (wide version) ▶ Spherical bearings DIN ISO 12240-1, K, re-lubricateable

Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 16mm outer diameter 38mm == Initial lubrication required before use ==

Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.
Bearing shell special brass CuZn38Al1.
Outer ring steel 9SMnPb28K, zinc plated.

  • Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).
  • Can be re-lubricated.
  • Initial lubrication required before use
  • For high sliding speed up to 60 m/min.
  • With outer ring (bigger outer diameter than version G or G..D).


Note: The specific loading of rod ends and spherical-plain bearings differs in each application. Therefore general statements by a producer in a catalogue may not totally fit to the single application. In all cases the user has to coordinate the theoretical selection criteria with the concrete installation situation and check the suitability of the rod end respectively spherical-plain bearing. In this context the user has to define sufficient security factors and maintenance intervals.

services: catalog further information

The supplied 3D models, pictures and technical drawings are made with reasonable care. Nevertheless liability is excluded for the accuracy and correctness of this data.

see also:

Ball Flange Bearings UCF, Grey Cast Iron
Ball Flange Bearings UCF, Grey Cast Iron

found in parts groups:

Products ▶ Rod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints ▶ Spherical bearings DIN 12240-1, K (wide version) ▶ Spherical bearings DIN ISO 12240-1, K, re-lubricateable
Products ▶ DIN-Parts sorted by DIN-Number ▶ DIN 648 - Rod Ends and Spherical Bearings ▶ Spherical bearings DIN 648 (12240-1), K ▶ Spherical bearings DIN ISO 12240-1, K, re-lubricateable
Products ▶ DIN-Parts sorted by DIN-Number ▶ DIN 12240 - Rod Ends and Spherical Bearings ▶ Spherical bearings DIN 12240-1, K (wide version) ▶ Spherical bearings DIN ISO 12240-1, K, re-lubricateable
part number price/unit dH7
[mm]		 B+0/-0,12
[mm]		 C+0/-0,24
[mm]		 DA+0/-0,012
[mm]		 d1
[mm]		 Tilt angle Alpha
[Degrees]		 Gewicht
[g]
63301600 CAD 611,90 Kč/piece
16 21 15 38 19,3 15 115