Cardan Joints KE, Steel

Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant.

Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides.

services: online CAD catalog further information

The supplied 3D models, pictures and technical drawings are made with reasonable care. Nevertheless liability is excluded for the accuracy and correctness of this data.

part number Ausführung d1H7
[mm]
d2
[mm]
d4
[mm]
l1
[mm]
l2
[mm]
bJS9
[mm]
t
[mm]
Drehmoment max.
[Nm]
Gewicht
[kg]
63001000 CAD A - 10 10,5 12 40 - - 2 0,020
63001300 CAD A - 13 14,0 12 42 - - 6 0,035
63001600 CAD A - 16 17,5 15 52 - - 8 0,067
63002000 CAD A - 20 21,5 18 62 - - 20 0,138
63002500 CAD A - 25 26,5 22 74 - - 30 0,230
63003200 CAD A - 32 33,5 25 86 - - 60 0,440
63004000 CAD A - 40 42,0 32 108 - - 160 0,880
63005000 CAD A - 50 52,5 40 132 - - 290 1,710
63006300 CAD A - 63 64,0 50 166 - - 550 3,070
63011000 CAD B 6 10 10,5 12 40 - - 2 0,014
63011300 CAD B 8 13 14,0 12 42 - - 6 0,024
63011300N CAD N 8 13 14,0 12 42 2 9 6 0,024
63011600 CAD B 10 16 17,5 15 52 - - 8 0,047
63011600N CAD N 10 16 17,5 15 52 3 11,4 8 0,047
63012000 CAD B 12 20 21,5 18 62 - - 20 0,089
63012000N CAD N 12 20 21,5 18 62 4 13,8 20 0,089
63012500 CAD B 16 25 26,5 22 74 - - 30 0,160
63012500N CAD N 16 25 26,5 22 74 5 18,3 30 0,16
63013200 CAD B 20 32 33,5 25 86 - - 60 0,310
63013200N CAD N 20 32 33,5 25 86 6 22,8 60 0,31
63014000 CAD B 25 40 42,0 32 108 - - 160 0,625
63014000N CAD N 25 40 42,0 32 108 8 28,3 160 0,63
63015000 CAD B 32 50 52,5 40 132 - - 290 1,200
63015000N CAD N 32 50 52,5 40 132 10 35,3 290 1,20
63016300 CAD B 40 63 64,0 50 166 - - 550 2,400
63016300N CAD N 40 63 64,0 50 166 12 43,3 550 2,40